Cisco WS-C2950-12 User Manual

2-7
Catalyst 2950 Desktop Switch Hardware Installation Guide
78-11157-03
Chapter 2 Installation
Preparing for Installation
• Operating environment is within the ranges listed in Appendix A, “Technical
Specifications.”
• Clearance to front and rear panels meet these conditions:
– Front-panel LEDs can be easily read.
– Access to ports is sufficient for unrestricted cabling.
– Rear-panel AC power connector is within reach of an AC power outlet.
– Rear-panel direct current (DC) power connector is within reach of a
circuit breaker.
• Airflow around the switch and through the vents is unrestricted.
• Temperature around the unit does not exceed 113°F (45°C).
Note If the switch is installed in a closed or multirack assembly, the
temperature around it might be greater than normal room
temperature.
• Cabling is away from sources of electrical noise, such as radios, power lines,
and fluorescent lighting fixtures.
Verifying Package Contents
Note Carefully remove the contents from the shipping container, and check each item
for damage. If any item is missing or damaged, contact your Cisco representative
or reseller for support. Return all packing materials to the shipping container and
save them.
The switch is shipped with these items:
• This Catalyst 2950 Desktop Switch Hardware Installation Guide
• Where to Find the Catalyst 2950 Documentation flyer
• Cisco Documentation CD-ROM
• AC power cord

Cisco WS-C2950-12 Specifications

General

Brand	Cisco
Model	WS-C2950-12
Category	Switch
Language	English