Cisco WS-C2950-12 User Manual

Chapter 2 Installation
Connecting to DC Power
2-26
Catalyst 2950 Desktop Switch Hardware Installation Guide
78-11157-03
Figure 2-23 Torquing Ground-Lug Screws
Wiring the DC-Input Power Source
Warning Only trained and qualified personnel should be allowed to install or replace this
equipment.
Warning Before performing any of the following procedures, ensure that power is
removed from the DC circuit. To ensure that all power is OFF, locate the circuit
breaker on the panel board that services the DC circuit, switch the circuit
breaker to the OFF position, and tape the switch handle of the circuit breaker in
the OFF position.
D
C IN
PUT FO
R
R
EM
OTE
PO
W
ER
SU
PP
LY
SPEC
IFIED IN
M
ANU
AL.
+12V @
4.5A
3
6
-
7
2
V
1
-
0
.5
A
C
ON
S
OLE
A
B
65295
Torque to 15 lbf-in.

Cisco WS-C2950-12 Specifications

General

Brand	Cisco
Model	WS-C2950-12
Category	Switch
Language	English