Cisco XR 12000 Series

5-99
Cisco IOS XR Getting Started Guide for the Cisco XR 12000 Series Router
OL-24755-01
Chapter 5 CLI Tips, Techniques, and Shortcuts
Displaying System Information with show Commands
For more information on the use of these commands, see the “Related Documents” section on page x.
Browsing Display Output When the --More-- Prompt Appears
When command output requires more than one screen, such as for the ?, show, or more commands, the
output is presented one screen at a time, and a
--More-- prompt appears at the bottom of the screen.
To display additional command output, do one of the following:
• Press Return to display the next line.
• Press Spacebar to display the next screen of output.
The following example shows one screen of data and the
--More-- prompt:
RP/0/0/CPU0:router# show ?
MgmtMultilink Show trace data for the multilink controller component
aaa Show AAA configuration and operational data
access-lists Access lists
address-pool Local address pool
adjacency Adjacency information
af-ea AF-EA Platform details
aliases Display alias commands
app-obj APP-OBJ Show Commands
aps SONET APS information
aqsm AQSM show commands
aqsmlib AQSMLIB show commands
arm IP ARM information
arp ARP show commands
arp-gmp ARP show commands
asic-errors ASIC error information
atc Attractor Cache related
atm ATM information
atm-vcm Show atm_vcm component
attractor Show commands for attractor process
attribute IM Attributes operations information
auto-rp Auto-RP Commands
--More--
Tip If you do not see the --More-- prompt, try entering a value for the screen length with the terminal
length command in EXEC mode. Command output is not paused if the length value is set to zero. The
following example shows how to set the terminal length:
show platform (EXEC mode) Displays information about cards and modules assigned to the
SDR to which you are connected.
EXEC mode
show platform (administration
EXEC mode)
Displays information about all cards and modules in the router. administration
EXEC mode
show environment Displays hardware information for the system, including fans,
LEDs, power supply voltage and current, and temperatures. Enter
show environment ? to see additional command options.
EXEC mode or
administration
EXEC mode
Table 5-2 Common show Commands in Cisco IOS XR Software (continued)
Command Description Command Mode