Cisco XR 12000 Series Getting Started Guide

2-25
Cisco IOS XR Getting Started Guide for the Cisco XR 12000 Series Router
OL-24755-01
Chapter 2 Bringing Up the Cisco IOS XR Software on a Standalone Router
Where to Go Next
show environment Command: Example
To display environmental monitor parameters for the system, use the show environment command in
EXEC or administration EXEC mode. The show environment [options] command syntax is used.
Enter the show environment ? command to display the command options:
RP/0/0/CPU0:router# show environment temperatures
The following example shows temperature information for a Cisco XR 12000 Series Router:
Mon May 31 02:27:06.397 DST
R/S/I Modules Sensor Temp. (deg C)
0/0/* host Inlet 32.5
host Hot 34.0
0/2/* host Inlet 31.0
host Hot 39.0
0/3/* host Inlet 32.0
host Hot 42.0
spa2 Chan4 50.0
spa2 Chan3 43.0
spa2 Chan2 48.0
spa2 Chan1 39.0
spa2 Local 48.0
spa1 Chan4 37.0
spa1 Chan3 33.0
spa1 Chan2 39.0
spa1 Chan1 33.0
spa1 Local 35.0
0/4/* host Hot 38.5
host Inlet 36.5
spa0 DownStream_ 35.0
spa0 UpStream_ 31.5
For more information, see Cisco IOS XR Interface and Hardware Component Command Reference for
the Cisco XR 12000 Series Router.
Where to Go Next
For information on configuring basic router features, see Configuring General Router Features.

Cisco XR 12000 Series Specifications

General

Brand	Cisco
Model	XR 12000 Series
Category	Network Router
Language	English