87
Operating Manual
Table: Printing material thicknesses
The printing material thicknesses indicated in the following tables are meant as guide num-
bers only.
Working with exible dies/RSP direct t exible dies in dry ink in fresh ink
Only cutting and/or perforating 0.50 mm 0.45 mm
Only cutting and/or perforating in combination with creasing 0.27 mm 0.23 mm
Working with RSP rules
Only cutting and/or perforating 0.50 mm 0.50 mm
Only creasing 0.40 mm 0.40 mm
Only cutting and/or perforating in combination with creasing 0.35 mm 0.26 mm
To Next Page
Loading...