EasyManuals Logo

Clear-Com EclipseHX Series User Manual

Clear-Com EclipseHX Series
161 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #151 background imageLoading...
Page #151 background image
User Guide | Eclipse HX-Median
Page 151
Humidity
40 - 90% non-condensing
Power (combined cards)
+3.3V 2.2A
Table 44 E-Dante-HX interface front card
14.21 E-DANTE64-HX interface rear card
Category
Measures / comments
Height
6RU
Depth
300 mm
Operating Temperature
0º C to +40º C
Storage Temperature
-55º C to +70º C
Humidity
40 - 90% non-condensing
Power (combined cards)
+3.3V 2.2A
Table 45 E-Dante64-HX interface rear card
14.22 E-Dante64-HX LAN connectors
Category
Measures / comments
RJ45
RJ45 ports are 100/1000 MB
Fibre
To be fitted with an SFP (Small Form-
factor Pluggable) Mini-GBIC (Gigabit
Interface Converter), available from
Clear-Com. See table below.
Table 46 E-Dante64-HX LAN connectors
14.23 E-Dante64-HX SFP modules
Category
Measures / comments
DA-MMFO-1G-SX
Multi-mode 1GBps SX Fiber module
DA-SMFO-1G-LX
Single-mode 1 GBps LX Fiber module
Note: Select transceivers to match your required cable type and network
infrastructure. As a general rule, the DA-MMFO-1G-SX module can be used for
shorter distances, while the DA-SMFO-1G-LX module will provide a longer
range (depending on existing cabling).
Table 47 E-Dante64-HX SFP modules

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Clear-Com EclipseHX Series and is the answer not in the manual?

Clear-Com EclipseHX Series Specifications

General IconGeneral
BrandClear-Com
ModelEclipseHX Series
CategoryIntercom System
LanguageEnglish

Related product manuals