EasyManua.ls Logo

Climax Mobile Pro - Page 35

Default Icon
63 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
32
When set as Enable, Mobile Lite auto answer an incoming call
(after the first ring), and wait for the correct Access Code (default:
1111) and # key entry within 15 seconds before it opens a full-duplex
Two-way communication. If the correct Access Code (and the # key)
are not entered within 15 seconds, the system will disconnect the
call automatically.
Press sensor button to end call:
Enable: When enabled, pressing the Active Button of RF device
(WTR, Fall Sensor or PB) once will end two-way communication.
Disable: When disabled, pressing the Active Button of RF device will
NOT end two-way communication. (Default)
Alarm and Continuous GPS
When Enabled, Mobile Lite will keep checking GPS location and
sending updated location info every 2 minutes within the
programmed time period after the Alarm is activated.
For example, if the function is selected as 30 minutes, Mobile Lite
will keep checking GPS location and sending updated location info
every 2 minutes during the programmed 30 minute-period after the
Alarm is activated.
When Disabled, Mobile Lite will only send GPS location once when
the Alarm is activated.
Use Last GPS Position
When Enabled, Mobile Lite will check GPS location regularly
according set time interval. When Mobile Lite is activated to send a
report, if new GPS location cannot be acquired by the time Guard
Time ends, Mobile Lite will send report with last acquired GPS
location. After new GPS location is acquired, Mobile Lite will send
another report to update the location info.
When Disabled, Mobile Lite will not check GPS location regularly.
When Mobile Lite is activated to send a report, if GPS location
cannot be acquired by the time Guard Time ends, Mobile Lite will
send report without GPS location. After GPS location is acquired,
Mobile Lite will send another report to update the location info.
GPS Tracker Report
This function is only applicable when Use Last GPS Position is
already enabled.
When Enabled, Mobile Lite will automatically send report whenever
GPS location info is updated.
When Disabled, Mobile Lite will not send report automatically.

Related product manuals