EasyManua.ls Logo

Climax Mobile Pro - Page 60

Default Icon
63 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
57
100 – Mobile Lite Emergency (emergency)
When the Active Button of Mobile Lite is pressed (“Help Event” set as
100).
101 – Personal Emergency (emergency)
When the Active Button of Mobile Lite is pressed (“Help Event” set as
101).
When the Active Button of the learnt-in Fall Sensor, WTR or Panic
Button is pressed.
102 – Inactivity (emergency)
When a Fall Sensor remains stationary for 10 seconds after fall
detection.
120 – Fall Detection / Panic (emergency)
When a fall is detected from the learnt-in Fall Sensor.
When the Active Button of Mobile Lite is pressed (“Help Event” set as
120).
158 – High Temperature Detected (emergency)
When the ambient temperature detected rises above high
temperature level.
159 – Low Temperature Detected (emergency)
When the ambient temperature detected drops below low
temperature level.
301 – AC Fail/Restore (status)
When AC is disconnected (fail)
When AC is re-connected(restored)
302 – Mobile Lite Low on Battery (status)
When Mobile Lite is low on battery.
311 – Amplifier Base ’s Battery Disconnected (status)
When the Amplifier Base’s battery is not connected.
384 – RF Device Low on Battery (status)
When the learnt-in RF Fall Sensor, WTR or Panic Button is low on
battery.
602 – Auto Check-In Report (status)
When Mobile Lite makes an auto check-in report to the CMS.
643 – Location Accuracy Deviation (status)
When the margin of error for locating Mobile Lite is too great.
644 – GPS/Cell Locate Time Out (status)
When Mobile Lite is unable to acquire any GPS/Cell Locate position
within reporting time limit.