53
TROUBLESHOOTING
The following provides indications on some possible anomalies and their corresponding solutions. The resulting operations are
the full responsibility of the person performing them. An authorised technician possessing the legal requisites for each operation
must be contacted to reset the operation of the unit.
The activation of a safety device indicates an operating anomaly: before resetting the device, check and eliminate the causes of
the anomaly. The following are possible problems and their corresponding causes and solutions.
WARNING
THE OPERATIONS SHOWN HERE ARE THE FULL RESPONSIBILITY OF THE PERSON PERFORMING THEM; AN
AUTHORISED TECHNICIAN POSSESSING THE LEGAL REQUISITES FOR EACH OPERATION MUST BE CONTACTED TO
RESET THE CORRESPONDING FUNCTION.
All faults and anomalous operating conditions are handled by the main control module. When an anomalous condition or fault
arises, the module, as well as placing the unit in safety mode, can display the event remotely.
To Next Page
Loading...
Need help?
General