Setup with the web interface for PC
4-16 Chapter 4: Setup and operation 98-144390-C
Reset to factory default - integrated GX modem
To reset the integrated modem to factory default, do as follows:
1. Select SERVICE > Modem.
2. In the drop-down box select the reset level:
• Level 0: Soft Reset – Power cycle of the GX modem
• Do not use: Level 2: Diagnostic Test Mode – Only connection to the GX modem is
the serial RS-232 interface, all other connections are shut down.
• Do not use: Level 3: Default Factory Configuration.
CAUTION! Administrators only. Close this page for guest users, see User
permissions (guest login) on page 4-12.
WARNING! The system becomes inoperable if you select Level 3: Default
Factory Configuration in the drop down list.
Figure 4-12: Web interface: SERVICE > Modem, Factory default
Note for level 2 and level 3: The GX modem may stop working. You may
have to upload new software.
To Next Page
Loading...
Need help?
General