Chapter 5: Maintenance and troubleshooting
98-148232-E Software update 100
Software update
Remote software update
See Remote software upgrade on page 42.
To update software locally with the web interface
To update the software in the EXPLORER 540, do as follows:
1. Download the new software
1
or acquire the software from Cobham SATCOM and save it
to your computer.
2. Connect your computer to the EXPLORER 540.
3. Open the web interface in your browser.
For details on how to access the web interface, see To access and navigate the web
interface on page 48.
4. Click
(Control panel) at the bottom of the page.
5. Click Support > Update software.
6. Click Update software...
7. Browse to the new software version and click Open. The file has the extension “.tiif”.
8. The EXPLORER 540 now restarts and completes the software update.
You can check the software version under Control panel > Support > About.
1. You can download the software from the “Cobham SYNC Partner Portal” at
www.cobham.com/satcom, select Cobham SYNC Partner Portal > Downloads. Locate the
EXPLORER 540 software.
Connect to the LAN interface of the EXPLORER 540. Depending on your system
configuration, you may have to connect through a router or a switch.
The update procedure takes a couple of minutes.
To Next Page
Loading...
