98-148232-E 22
Chapter 3
Operation
3
This chapter describes operation and basic setup, primarily for M2M use.
For information on configuration with the web interface, see Configuration with web
interface on page 47.
This chapter describes:
• Local or remote control
• To access the terminal using AT commands
• To access the terminal from a remote location
• Security setup
• To control data connections (PDP contexts)
• Power-saving
• Remote software upgrade
• File transfer
• Status of the EXPLORER 540
For information on functions that are not available with an M2M subscription but only with a
standard BGAN subscription, see BGAN non-M2M functions on page 143.
To Next Page
