Appendix B: Command reference
98-148232-E SMS remote commands 130
Parameter Values Meaning
<wakeup> 0
1
NA
Do not wake up the terminal.
Wake up the terminal at the specified intervals.
Placeholder when no value is specified. The existing setting applies. Used if
you want to change one of the other parameters without changing the
wake-up setting.
<wanmode> 0
1
2
3
4
5
6
Not valid for EXPLORER 540
Not valid for EXPLORER 540
BGAN only
Not valid for EXPLORER 540
Cellular modem preferred
Not valid for EXPLORER 540
Cellular modem preferred (PRISM)
<wdog_enable> 0
1
NA
Disabled.
Enabled.
Placeholder when no value is specified. The existing setting applies. Used if
you want to change one of the other parameters without changing the
enabled/disabled setting.
<wdog_op> 1
2
Get watchdog configuration.
Set watchdog parameters.