Appendix C: BGAN non-M2M functions
98-148232-E To make phone calls over BGAN (not M2M version) 147
First time SIP setup
If it is the first time you connect your phone to the EXPLORER 540 for making calls, you must
first set up the SIP server details in your phone. For information how, see the user
documentation for your phone. You may be asked to enter some of the following details:
• SIP server address and port: Default address: 192.168.0.1, Port: 5060
• User name: Local number in EXPLORER 540 (0501 to 0516)
• Password: Default same as user name
• Codec priority: Highest priority codec type: G.711
Call types
Definition
The phone connection can be a Standard voice connection or a 3.1 kHz audio connection.
•For outgoing calls, the call type is Standard voice by default.
You can change the call type for your call to 3.1 kHz audio by dialling 2* before the
number.
Example: 2*004539558800
• For incoming calls, you can set up in the web interface (IP handset page) which call types
you want to receive on your smartphone or IP handset. Only the call types selected for a
smartphone/IP handset are received. By default all, call types are accepted.
When receiving calls, the mobile number determines which call type is used. In your airtime
subscription you have one number for 3.1 kHz audio and one number for Standard voice.
Remember that the call is only received on your phone if the call type used is selected for that
phone (called IP handset in the web interface).
For information on how to set up the call types in the web interface, see To manage VoIP
phones or smartphones on page 149.
To make or receive a phone call with EXPLORER 540
Connect your smartphone or IP handset as described in To connect a VoIP phone or
smartphone on page 146.
To make a call from the EXPLORER 540
To make a call, dial 00 <country code> <phone number> followed by off-hook key.
Example: To call Cobham SATCOM in Denmark (+45 39558800),
dial 00 45 39558800
If there was an error establishing the connection, the web interface of the EXPLORER 540
shows an error message.
The user name and password must match the IP handset settings in the
EXPLORER 540. See To manage VoIP phones or smartphones on page 149.
To Next Page
Loading...
