Chapter 4: Configuration with web interface
98-148232-E Status information 57
The following status is available:
Terminal status:
• Network in use: The network currently used (BGAN or Cellular).
• (BGAN) status: The current status of the BGAN network. In the example in the previous
page, “Data” means a data connection is running. The status could also be e.g.
“Registering” or “Ready”.
• BGAN M2M SIM: Shows whether or not the BGAN SIM card is an M2M SIM (Yes or No)
• (BGAN) current satellite: The satellite to which the EXPLORER 540 is currently registered.
• (BGAN) spot beam: The type of spot beam currently used, e.g. “Regional” or “Narrow”.
• (BGAN) signal strength: The signal strength of the BGAN connection.
• (BGAN) Airtime Provider: The provider of the BGAN services.
• Cellular status: The current status of the cellular network. In the example, a data
connection is running.
• Cellular network operator: The operator (or provider) of the Cellular network.
• Local IP address: The local IP address of the EXPLORER 540. E.g. used to connect to the
web interface.
• PRISM BGAN status: The status of the BGAN connection to the PRISM server
(Connecting or Connected)
• PRISM Cellular status: The status of the Cellular connection to the PRISM server
(Connecting or Connected)
• Logged in as: You can log in as User or Administrator. this field shows how you are
logged in.
Position information:
• Status: Shows the status of the GNSS connection, e.g. if there is 2D fix, 3D fix or no fix.
• Position: The geographic position of the EXPLORER 540.
• GNSS: Shows which GNSS systems are currently used to obtain the position.
• Satellites used: Shows how many GNSS satellites are used to obtain the position.
Data information (only shown if a data connection is running)
• EXPLORER Cellular Modem: Shows which type of data is running on the cellular
connection.
• Standard data: Shows that a Standard data connection is running on the Standard data
connection package. This is the only option when the terminal is running in Cellular
preferred mode,
Call information (only shown if a voice call is ongoing)
• Status: The status of the call, e.g. “Connected” or “Ringing”.
• Call type: Shows whether the call type is Standard voice or Premium voice (3.1 kHz
Audio).
• Call duration: The duration of the call.
• Originator: The phone number from which the call was made.
• Receiver: The phone number that receives the call.
If the terminal is running as BGAN only, the cellular status fields are not shown.
Likewise, the PRISM status fields are only shown if PRISM is used.
To Next Page
Loading...
