Chapter 4: Configuration with web interface
98-148232-E To use the logs 60
Call log (Non-M2M only)
With Non-M2M subscription the Call log shows:
• Outgoing calls shows the start time, receiving end phone number, duration, type
(Standard voice or 3.1 kHz audio), termination cause and, if Call charges have been
entered, estimated charge of each outgoing call.
• Received calls shows the start time, calling phone number, duration, type (Standard
voice or 3.1 kHz audio) and termination cause of each incoming call.
• Missed calls shows the start time, calling phone number, type (Standard voice or
3.1 kHz audio) and termination cause of each incoming call that was not received.
To clear the Call log, click the Clear call log button at the top.
Data log
The Data log shows:
• Standard data shows data usage, date and time, termination cause and estimated charge
of each Standard data session (if Call charges have been entered).
• For Non-M2M only: Streaming data shows the duration and type (such as 64 kbps,
128 kbps), date and time, termination cause and estimated charge of each Streaming data
session (if Call charges have been entered).
• Cellular modem data (only present if the optional cellular modem is used) shows data
usage, date and time and termination cause of each cellular data connection.
To clear the Data log, click the Clear data log button at the top.
Total counters
The total counters show:
• For Non-M2M only: Call session totals shows the total duration (hh:mm:ss) for each
call type since the log was last cleared. It also shows the estimated call charge for each call
type (if Call charges have been entered).
• Data session totals shows totals for each data connection type since the log was last
cleared. For Standard data the totals are shown as amount of data transferred (kB) and for
Streaming connections the totals are shown in duration (hh:mm:ss). It also shows the
estimated charge for each data type (if Call charges have been entered).
• Cellular session totals (only present if the optional cellular modem is used) shows totals
for each cellular data connection since the log was last cleared.
To reset the Total counters, click the Reset total counters button at the top.
To Next Page
Loading...
