Chapter 4: Configuration with web interface
98-148232-E Support features 76
To restart the terminal
If you want to restart the terminal, do as follows:
1. From the Support page, select Reboot terminal.
2. Click to confirm the reboot.
The terminal restarts. Note that this is the equivalent to switching the terminal off and on
again. It is not the same as pushing the Reset button, the installation process will not
restart.
About
The About page shows the Serial number, software version, IMSI and IMEI of your
EXPLORER 540 as well as legal information. It also shows your Help desk information, if it has
been entered under Advanced > Help desk.
To access the About page, select Support > About.
To Next Page
Loading...
