Chapter 4: Configuration with web interface
98-148232-E Advanced settings 87
2. Enter the password for remote SMS. It can be 5 to 15 characters long. The characters 0-9,
a-z and A-Z are allowed. The password is mandatory. This password must be entered
every time you send an SMS command. Default password is remote.
3. Clear the box Trust all phone numbers and enter at least one trusted mobile number
from which the terminal accepts an SMS. Use the wild card * to accept a range of trusted
numbers.
4. To add more phone numbers, click Add phone number again.
5. Click Save.
For information on how to send SMS commands, see Remote access with SMS on page 25.
Remote control of tracking
When you are using the tracking function of the EXPLORER 540, you can set up the terminal so
that the tracking server can access the EXPLORER 540 e.g. to start or stop tracking or to change
reporting intervals.
To allow the tracking server to control the tracking settings, do as follows:
1. Under Advanced, select Tracking settings.
2. Select Allow remote control of tracking.
3. Click Save.
The EXPLORER terminal will now accept commands from the specified tracking server, for
example to change reporting intervals or start/stop reporting.
Entered mobile number with wild card Mobile numbers accepted
+453955880* +4539558800 to +4539558809
+45395588* +4539558800 to +4539558899
To Next Page
Loading...
