SNMP support
6-52 Chapter 6: Configuration 98-133966-G1
6.5 SNMP support
The SAILOR 900 VSAT supports SNMP v2 requests to retrieve
configuration and present settings. SNMP is always enabled on all
Ethernet interfaces. The SNMP community string is public.
The SAILOR 900 VSAT offers via SNMP most of the data that are
available from the DASHBOARD web pages. Detailed documentation
about supported OIDs can be found in the SAILOR 900 VSAT MIB file.
The MIB entries are grouped as shown below:
• System configuration
• Navigation coordinates
• Antenna pointing
• Dashboard and profile
• Tracking receiver
You can acquire the ACU MIB file in two ways:
1. Download the ACU MIB from Cobham eSupport web site.
2. Download the ACU MIB file directly from your ACU:
http://acu-ip-address/mibs/mib-file-name
e.g. http://192.168.0.1/mibs/thrane_tt7090_all_SMIv2.mib
Note
All SNMP values are of a nature which does not need to be
polled more often than once a minute. Polling SNMP values
more frequently will impact the performance of the ACU.
SAILOR900TM.book Page 52 Monday, September 16, 2013 11:01 AM
To Next Page
Loading...
