EasyManua.ls Logo

COBHAM Sailor 900 VSAT - Figure 6-1: LAN Connector Used for Configuring the SAILOR 900 VSAT; Figure 6-2: SAILOR 900 VSAT Dashboard

COBHAM Sailor 900 VSAT
356 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Introduction to the built-in web interface
6-2 Chapter 6: Configuration 98-133966-G1
3. Open your Internet browser and enter the IP address of the ACU.
The IP address is http://192.168.0.1 (default).
4. The web interface shows the DASHBOARD page.
When the Dashboard is displayed you have verified that the connection
to the SAILOR 900 VSAT can be established. The web interface is ready
for use. You can continue to configure the system.
If you cannot establish a connection there might be problems with the
Proxy server settings of your PC. See Proxy server settings in your
browser on page 6-16 for further information. For a detailed
introduction to the web interface see Overview and dashboard on
page 6-13. If you want to use another LAN port you must configure it
according to your network requirements. For information how to
configure the LAN connectors see Configuring the LAN network on
page 6-28.
Figure 6-1: LAN connector used for configuring the SAILOR 900 VSAT
Figure 6-2: SAILOR 900 VSAT Dashboard
SAILOR900TM.book Page 2 Monday, September 16, 2013 11:01 AM

Table of Contents