COBHAM Sailor 900 VSAT - ACU Configuration; C.4.2 ACU Configuration

STM SatLink 2900 VSAT modem
98-133966-G1 Appendix C: VMU settings C-19
CCCC
VMU settings
Example:
odu antctrl show
Antenna Controller Configuration
--------------------------------
Type : Thrane & Thrane SAILOR
900
Enabled : All
IP address : 10.110.2.226
Polling frequency : 5 sec
Antenna Stability Tries : 300
Antenna Controller Status
--------------------------------
Controller detected : no
Packets sent : 0
Packets received : 0
C.4.2 ACU configuration
To set up the ACU to work with an STM Satlink 2900 VSAT modem, do
as follows:
1. Add a modem profile with the STM Satlink 2900 modem. See VSAT
modem profile – New entry and Edit on page 6-23.
2. Add a satellite profile using the STM Satlink modem profile just
created. See Satellite profiles – New entry and Edit on page 6-20.
3. Edit the network settings and input the IP information supplied with
the modem. See Configuring the LAN network on page 6-28.
4. Activate the satellite profile.
SAILOR900TM.book Page 19 Monday, September 16, 2013 11:01 AM