Do you have a question about the Cobra 57648 and is the answer not in the manual?
Brand | Cobra |
---|---|
Model | 57648 |
Sensors Included | Door/Window Sensors, Motion Detector |
Installation | DIY |
Power Source | Battery |
Alarm Type | Siren |
Coverage Area | Up to 1, 000 sq ft |
General safety warnings, installation, and usage precautions.
Specific safety warnings for cameras and the NVR unit.
Information on grounding procedures and extension cord usage.
Overview of the NVR's rear panel connections and indicators.
Details the buttons and functions of the remote control for the NVR.
Illustrates how to connect the NVR system components and cameras.
Instructions on how to connect the NVR to a power source.
Explains how to use the NVR's mouse for navigation and control.
Describes the on-screen virtual keyboard for data input.
Guide to setting an initial administrator password for system security.
Guides through the initial system configuration steps upon first startup.
Details how to configure network settings like IP address, subnet, and gateway.
Explains how to set the system's date, time, and time zone.
Instructions for adding and configuring IP cameras to the NVR.
Covers formatting and managing the NVR's storage (HDD).
How to set the output resolution for the monitor.
Information on mobile access via P2P ID and QR code.
Review of configured system settings before finishing the wizard.
Explanation of the main live view interface and its elements.
Describes the toolbar for quick camera controls like recording and zoom.
Overview of the taskbar icons for system functions and layout changes.
Access to system setup, search, shutdown, and user switching.
How to lock and unlock the NVR screen for security.
Process for properly shutting down, rebooting, or logging out the NVR.
Configure camera connections, live view, image settings, PTZ, and intelligent analysis.
Configure recording parameters, encoding, schedules, and image capture.
Set up alarm actions for motion, PIR, intelligent detections, and system exceptions.
Configure AI functions like Face Detection, Human/Vehicle Detection, and statistics.
Configure network parameters, email, FTP, IP filter, and voice assistants.
Configure storage devices, including HDDs, S.M.A.R.T, and cloud storage.
Configure system info, users, maintenance, and camera settings.
Access the search interface to find recorded video and snapshots.
Search and play back video recordings by date and type.
Save video clips to a USB flash drive.
Search, play, and back up specific recorded events.
Play multiple recordings or events simultaneously from a single channel.
Quickly search and play motion recording videos triggered by human beings.
Search, play, and manage content using added tags.
Play video files saved on external USB memories.
Search, play, and copy snapshots to a USB flash drive.
Slice each hour's video into 60 fragments for detailed review.
Search captures based on AI functions like face recognition.
Search for captured faces based on date, time, channel, and groups.
Perform quick searches for human beings and vehicles.
Use face detection for attendance checking and analysis.
Minimum hardware and OS requirements for using the Web Client.
Steps to download and install the necessary browser plug-in for Web Client access.
Manage NVR functions remotely through the web client interface.
Overview of the live preview interface within the Web Client.
Search and play back recorded videos remotely via the Web Client.
Remotely configure NVR settings via the Web Client.
Set download locations and file types for recordings via Web Client.
System requirements for the video player software.
Controls and features of the video player application.
Instructions to find and install the mobile viewing app.
Navigate the mobile app to add the NVR device.
View live stream of the added NVR in the mobile app.
Add NVR using online search or manual input via mobile app.
Common issues and solutions for NVR operation.
Guidelines for maintaining the NVR's hardware and performance.