Cobra 57648 - Chapter 6 Search, Playback & Backup; 6.1 Using Search Function

USER MANUAL
136
5.8.1.1 Channel View Setup
1. Click the add icon or setup icon to get to the configuration page.
2. To enable the channel(s) you want to realize the counting function in the
Channel
list.
The Setup & Alarm icon will be in blue color if the camera in that channel supports AI
function; on the contrary if the camera doesn’t support AI function, the icon will be in grey
color.
3. Set the
Capacity
number for each channel, which is the maximum limitation of the
attendance.