USER MANUAL
5.5.4 FTP
This menu allows you to enable FTP function to view and load captured snapshots from NVR
to your storage device over FTP.
FTP Enable
: Click to enable FTP function.
Server IP
: Enter your FTP server IP address or domain name.
Port
: Enter the FTP port for file exchanges.
Name/ Password
: Enter your FTP server user name and password.
Directory Name
: Enter the default directory name for the FTP file exchanges.
Test FTP
: Click to test the FTP settings.
FTP Schedule:
The color codes on email schedule have the following meanings:
Yellow
: Slot for Motion detection.
Red
: Slot for I/O Alarm (optional).
Purple
: Slot for PIR detection.
Blue
: Slot for Intelligent Analysis detection.
To Next Page
Loading...
