Cobra 57648 - CC (Cross Counting Detection)

USER MANUAL
43
of the region should be a convex polygon. Concave polygon will be not able to save.
3.
Click
Save
to save your settings.
4.
If you want to adjust the size of the region, click the red box in the region, the borders of
the region will be changed to red color. Long press the left button of your mouse to move
the whole region, or drag the corners to resize the region.
5.
If you want to remove one of the regions from the camera picture, click the red box in the
region and then click
Remove
button. Click
Remove All
will delete all regions.
For Alarm setup, please refer to
5.1.9.1.1 Alarm Setup
5.1.9.5 CC (Cross Counting Detection)
Cross Counting function counts the times for moving objects or people across the virtual
lines.
Switch:
Check the box to enable CC function.
Sensitivity
: Set the sensitivity level. Level 1 the lowest sensitivity level while level 4 is the
highest sensitivity level.
Click
Setup
icon to draw a virtual line in the camera image.