Cobra 57648 - Pppoe; Port Configuration

USER MANUAL
85
5.5.1.2 PPPoE
This is an advanced protocol that allows the NVR to connect to the network more directly via
DSL modem.
Check the “Enable PPPOE” box, and then enter the User name & Password of the PPPoE.
Click
Apply
to save, system will reboot to active the PPPoE setting.
5.5.1.3 Port Configuration
Web Port
: This is the port that you will use to log in remotely to the NVR (e.g. using the Web
Client). If the default port 80 is already taken by other applications, please change it.
Client Port
: This is the port that the NVR will use to send information through. If the default
port 9000 is already taken by other applications, please change it.
RTSP Port:
Default is 554, if the default port 554 is already taken by other applications,
please change it.