Cobra 57648 User Manual

USER MANUAL
170
Chapter 7 Remote Access via Web Client
Use the Web Client to remotely access your NVR at any time via a PC. Before you access
the Web Client, you need to ensure that the internet settings of the NVR are configured
properly.
7.1 Basic System Environment Requirements
The minimum requirements for hardware and OS required to run Web Client are given as
below.
7.2 Web Plugin Download and Installation
In order to access the Web Client, you would need to install the plug-in for Internet Explorer.
It is unnecessary to install plug-in for Edge, Firefox, Google Chrome and Mac Safari.
1.
Launch the explorer on your PC and enter the NVR IP address or DDNS domain name
(Host Name) you have set on NVR in the URL box.
2.
For the first time you run the web client, system will require to install the web client plugin.
Click
download
to download the plugin and install to your computer.
Item
Minimum
Recommended
CPU
Intel® Core™ i5 CPU
Intel® Core™ i5 CPU or higher
RAM
4G or more
8G or more
Hard Drive
500G or more
1000G or more
Display RAM
2G or more
4G or more
Display Resolution
1280*1024
1920*1080
OS
Windows 10 or above
Mac OS X® 10.9 or above
DirectX
DirectX 11
Direct3D
Acceleration Function
Ethernet Adapter
10/100/1000M Ethernet Adapter
Browser
Microsoft Internet Explorer, Edge, Firefox, Google Chrome, Mac Safari

Cobra 57648 Specifications

General

Brand	Cobra
Model	57648
Category	Security System
Language	English