Cobra 57648 - PID (Perimeter Intrusion Detection)

USER MANUAL
61
Detection Mode: Motion Mode will detect moving objects. Static Mode will detect both
moving faces and still objects.
Detection Range: Set the detection zone. You can choose “Full Screen” or “Customize” to
adjust the shape of rectangular detection zone in the camera image. Target objects appear in
this zone will be detected and captured.
Dynamic Marking：If you enable this option, a capture box will be displayed upon the
detected objects in both live view images and recording files.
5.4.1.3 PID (Perimeter Intrusion Detection)
Perimeter Intrusion Detection function detects people, vehicle or other objects which enter
and loiter in a pre-defined virtual region, and some certain actions can be taken when the
alarm is triggered.
Switch：
To enable or disable the Perimeter Intrusion Detection.
Click to configure the detection conditions.
Channel: Channel selection
Detection Type: Choose the detection target objects.
Rule Number
: Max. 4 rules available.
Rule Switch:
Activate or inactivate the rule.
Rule Type:
Detection direction from B A, AB or AB
Dynamic Marking：If you enable this option, the border of the detection zone will be
displayed in both live view images and recording files.