USER MANUAL
4.2.2 Taskbar
Click to open the Start Menu
Click to choose different layout for live view
Click to choose more layouts for live view
Click to start viewing channels in a sequence. You’re able to set the sequence display
mode on 5.7.1.3 Output Configuration
Quick playback. You can choose to play the latest recording for all channels from the
beginning of the day, or you can choose the playback from the latest 5s, 10s, 30s, 1Min,
5Min.
Click to adjust audio volume
Click to switch all IP channels between mainstream and substream (for live view
resolution)
Click to switch among real-time, balanced, or smooth view. The view effect modes
affect only the live view video quality by bitrate and frame rate but do not affect the recording
quality.
To start or stop Manual Record and Manual Alarm.
To view system information, channel information, record info and network state.
This icon will appear if the network is disconnected.
4.2.3 Start Menu
With the Start menu, you can switch user, search & playback, enter system setup menu, lock
& unlock the screen, shut down, reboot & logout the system.
To switch user. To enable multi-user, please view on 5.6.3 Multi-user.
Search & Playback. View more on Chapter 6 Search, Playback & Backup
NVR System Setup. View on Chapter 5 NVR System Setup
Lock & unlock screen. View on 4.2.3.1 Unlock and Lock Screen.
Shutdown, reboot & logout the system. View on 4.2.3.2 Shutdown.
To Next Page
Loading...
