USER MANUAL
5.1.8 Deterrence
This menu allows you to configure the deterrence parameters.
Channel: channel name.
Setup: Click icon into the setup page.
Light Switch
: Enable or disable light warning.
Siren Switch
: Enable or disable siren warning.
Sensitivity
: Set the sensitivity level. Level 1 the lowest sensitivity level while level 8 is the
highest sensitivity level.
Schedule
: click icon
to open the configure the schedule.
When the time slot is marked light blue, this indicates the channel triggers deterrence alarm
for that time slot.
Deterrence Area:
The whole screen is marked for
deterrence detection (red blocks) as
default. If you want to disable the
deterrence detection on a certain area,
click the grid cursor and then drag the
mouse to highlight the scope to unmark
the area into transparent blocks. After
setting is completed, click the right button
of your mouse to return and click Save to
make the area setup effective.
To Next Page
Loading...
