Cobra 57648 - Page 41

USER MANUAL
30
IR-CUT Mode: If you want the camera to switch the image between colorful and black &
white automatically, then choose “GPIO Auto”; If you want the camera to record colorful
images all the time, then choose “Color Mode” ; If you want the camera to record black &
white images all the time, then choose “Black White Mode”; If you want the camera to
record black & white images in a certain period, then choose “Schedule(B/W)”, and then set
the start and end time.
WDR/DWDR: Enable to allow automatically adjust the brightness and contrast of the video
when shooting in the darkness with bright light sources.
IR-LED / Supplement Light: Set the IR/Supplement lights on/off.
Set the shutter
mode
Choose the exposure time of the
camera
Select the desired built-in IR cut filter mode
to ensure the camera works properly both in
the day and night.
Set the delay time of IR-CUT
Set the IR LED / Supplement lights
on/off
Flip vertical
To enable the corridor mode
Rotation 180°
Choose a channel to
To enable or disable 3D noise
reduction function
To enable or disable
WDR/DWDR
Set the WDR
level
Automatic Gain
Control
Configure white balance
Use in foggy environments to improve the video
quality
Flip horizontal
To enable or disable back light
compensation
To enable or disable the high light
compensation
Load default values