Cobra 57648 - Page 49

USER MANUAL
38
In the page, you can configure the alarm action when an alert is triggered.
Buzzer
: Disable or to active the buzzer to emit an alarm tone in 10, 20, 40 or 60 seconds
when the detection is triggered.
Alarm Out
: If your NVR support to connect to external alarm device, you can set to emit an
alarm tone.
Latch Time
: To configure the external alarm time when the detection is triggered.
Record
: To choose the record channel(s) when a PID alert happens.
Post Recording
: You can set how long after an event occurs that the NVR will continue to
record. ftp
Show Message:
A letter “
S
” will be displayed on the screen when the PID function is
triggered.
Send Email:
If an alarm is triggered, an Email will be sent to your preset email account.
FTP Picture Upload
: To upload alarm images to FTP server when motion is detected. To
enable FTP, please view.
FTP Video Upload
: To upload alarm video to FTP server when motion is detected. To enable
FTP, please view 5.4.4 FTP.
Picture to Cloud:
To upload alarm images to cloud server when motion is detected. To
enable Cloud, please view 5.6.2 Cloud.
Video to Cloud:
To upload alarm video to Cloud server when motion is detected. To enable
Cloud, please view 5.6.2 Cloud.
Full Screen
: If this function is enabled and an alert is detected in a channel, you will see its
full screen images in live view.