Codan HF SSB series User Manual

Sending calls
4-44 HF SSB transceiver user guide
Action Notes
10.
To send the call, press
Call
or
F1
You hear your transceiver’s
calling tones. Example of the
display:
208
5820
CALL
Tx
USB
HI
Tel-Calling:
185074
Within 20 seconds, the other
station automatically
acknowledges your call by
sending a 4-beep tone revertive
signal. You may hear a tuning
tone first if this station has an
automatic tuning antenna. After
a pause, you hear the telephone
ringing.
11.
Wait for the person to
answer the telephone
then respond with
normal voice
communication.
At the end of a telcall, the
telephone line should be
disconnected by command
before you hang up.
If you hear the engaged tone,
the other party has hung up
without disconnecting the line.
12.
To disconnect the line
by sending an
ENDCALL
message,
press
Call
Example of the display:
208
5820
CALL
Rx.
USB
HI
Selcall:
TYPE
185074
Sending calls
4-44 HF SSB transceiver user guide
Action Notes
10.
To send the call, press
Call
or
F1
You hear your transceiver’s
calling tones. Example of the
display:
208
5820
CALL
Tx
USB
HI
Tel-Calling:
185074
Within 20 seconds, the other
station automatically
acknowledges your call by
sending a 4-beep tone revertive
signal. You may hear a tuning
tone first if this station has an
automatic tuning antenna. After
a pause, you hear the telephone
ringing.
11.
Wait for the person to
answer the telephone
then respond with
normal voice
communication.
At the end of a telcall, the
telephone line should be
disconnected by command
before you hang up.
If you hear the engaged tone,
the other party has hung up
without disconnecting the line.
12.
To disconnect the line
by sending an
ENDCALL
message,
press
Call
Example of the display:
208
5820
CALL
Rx.
USB
HI
Selcall:
TYPE
185074

Codan HF SSB series Specifications

General

Brand	Codan
Model	HF SSB series
Category	Transceiver
Language	English