Codan HF SSB series - Selecting Channels

Using the transceiver
HF SSB transceiver user guide 3-7
Selecting channels
Before you can send a call, you need to select which channel
to use.
You can change the channel by:
• viewing the list of channels
• recalling a channel number
• recalling a channel receive frequency
• answering a call from the call memory (see Chapter 5,
Reviewing calls held in memory).
There are two types of channels:
• transmit channels that allow you to send and receive calls
• receive-only channels that only allow you to receive
calls.
A bar over the displayed frequency indicates that a channel is
receive-only (see Chapter 2, The display layout).
Using the transceiver
HF SSB transceiver user guide 3-7
Selecting channels
Before you can send a call, you need to select which channel
to use.
You can change the channel by:
• viewing the list of channels
• recalling a channel number
• recalling a channel receive frequency
• answering a call from the call memory (see Chapter 5,
Reviewing calls held in memory).
There are two types of channels:
• transmit channels that allow you to send and receive calls
• receive-only channels that only allow you to receive
calls.
A bar over the displayed frequency indicates that a channel is
receive-only (see Chapter 2, The display layout).