Codan HF SSB series User Manual

Using the transceiver
HF SSB transceiver user guide 3-33
Using Free-Tune Receiver mode
Free-Tune Receiver mode allows you to tune the receiver to
any frequency within the transceiver’s operating range
(250kHz–30MHz).
You can temporarily change the frequency of the current
channel or you can directly enter a new frequency. When you
return to Channel mode, the frequency is reset to the original
value.
If you want to save the frequency you set in Free-Tune
Receiver mode, you must create a channel that has this
frequency (refer to the HF SSB transceiver reference manual,
Chapter 3, Channel creation in Free-Tune Receiver mode).
Setting a receive frequency
To set a receive frequency using the control panel:
Action Notes
1.
Repeatedly press
Mode
until you see the display
for Free-Tune Receiver
mode.
Example of the display:
USB
HI
Rx.
4,010.00
Free Tune Receiver
The display shows the
frequency of the current
channel.
Using the transceiver
HF SSB transceiver user guide 3-33
Using Free-Tune Receiver mode
Free-Tune Receiver mode allows you to tune the receiver to
any frequency within the transceiver’s operating range
(250kHz–30MHz).
You can temporarily change the frequency of the current
channel or you can directly enter a new frequency. When you
return to Channel mode, the frequency is reset to the original
value.
If you want to save the frequency you set in Free-Tune
Receiver mode, you must create a channel that has this
frequency (refer to the HF SSB transceiver reference manual,
Chapter 3, Channel creation in Free-Tune Receiver mode).
Setting a receive frequency
To set a receive frequency using the control panel:
Action Notes
1.
Repeatedly press
Mode
until you see the display
for Free-Tune Receiver
mode.
Example of the display:
USB
HI
Rx.
4,010.00
Free Tune Receiver
The display shows the
frequency of the current
channel.

Codan HF SSB series Specifications

General

Brand	Codan
Model	HF SSB series
Category	Transceiver
Language	English