To Next Page

To Previous Page

HF SSB transceiver user guide 4-1

4 Sending calls

This chapter shows you how to send:

• ALE calls (4-3)

• Emergency selcalls (4-7)

• GPS beacon calls (4-12)

• GPS position calls (4-16)

• Page calls (4-20)

• Selcalls (4-26)

• Selective beacon calls (4-29)

• Status calls (4-32)

• Telcalls (4-39)

• Tone calls (4-46)

• Voice calls (4-48).

This chapter covers the full range of call types for HF SSB

series transceivers. To find out what types of call your

transceiver can send, see the front of this guide for the list of

fitted transceiver options. All HF SSB series transceivers can

send tone and voice calls.

When making a call, the station you are calling needs to be

set to the channel frequency you are using.

In any call procedure up to the point transmission starts, the

transceiver automatically switches back to Channel mode if

you do not touch any button or knob for 30 seconds. If this

happens, start the procedure again.