Codan HF SSB series - Page 75

Sending calls
4-2 HF SSB transceiver user guide
Messages like
No calls available
are displayed if the type of
call you are trying to send is not enabled. If this happens,
check the conditions listed at the start of the call procedure
under the heading Before you can send this call, you need
to...
The displays in this chapter show examples of channel and
frequency numbers. You must use numbers appropriate for
your own transceiver.
Sending calls
4-2 HF SSB transceiver user guide
Messages like
No calls available
are displayed if the type of
call you are trying to send is not enabled. If this happens,
check the conditions listed at the start of the call procedure
under the heading Before you can send this call, you need
to...
The displays in this chapter show examples of channel and
frequency numbers. You must use numbers appropriate for
your own transceiver.