To Next Page

To Previous Page

Receiving calls

5-10 HF SSB transceiver user guide

Setting up to receive emergency selcalls

An emergency selcall:

• alerts you by a special emergency tone and message

• automatically notifies you of the caller’s GPS position if

their station is set up for GPS.

You can set up your transceiver to:

• respond to emergency selcalls sent to your station and up

to two additional addresses

• respond to all emergency selcalls

• not respond to any emergency selcalls.

Before you can receive an emergency selcall, you need to:

• set up your address (refer to the HF SSB transceiver

reference manual, Chapter 8, Selcall address setup)

• set up how you want to receive emergency selcalls (refer

to the HF SSB transceiver reference manual, Chapter 6,

Emergency selcall receive setup).

• set

4-DIGIT-COMPATIBLE

if you expect emergency

selcalls from stations using 4-digit addresses (refer to the

HF SSB transceiver reference manual, Chapter 8, Selcall

address size compatibility).

