Codan HF SSB series User Manual

Advanced features
6-6 HF SSB transceiver user guide
Action Notes
3. (cont.)
To stop the call during this 30
seconds, press
PTT
If the station is attended, you
will get an immediate reply. If
it is unattended, you should
hear an acknowledgment tone
within two minutes to indicate
that your call has been received
and that an operator will speak
to you soon.
If the display shows
Not
Enabled
, the channel is not an
RFDS frequency and cannot be
used for an emergency call.
4.
Did the RFDS station
respond by voice or
acknowledgment tone?
Yes  Step 5.
No  Repeat from
Step 2.
If your call was not
acknowledged, try sending it
again. If the call fails
repeatedly, try another channel.
5.
Wait on this channel for
a reply before sending
your message.
Advanced features
6-6 HF SSB transceiver user guide
Action Notes
3. (cont.)
To stop the call during this 30
seconds, press
PTT
If the station is attended, you
will get an immediate reply. If
it is unattended, you should
hear an acknowledgment tone
within two minutes to indicate
that your call has been received
and that an operator will speak
to you soon.
If the display shows
Not
Enabled
, the channel is not an
RFDS frequency and cannot be
used for an emergency call.
4.
Did the RFDS station
respond by voice or
acknowledgment tone?
Yes  Step 5.
No  Repeat from
Step 2.
If your call was not
acknowledged, try sending it
again. If the call fails
repeatedly, try another channel.
5.
Wait on this channel for
a reply before sending
your message.

Codan HF SSB series Specifications

General

Brand	Codan
Model	HF SSB series
Category	Transceiver
Language	English