EasyManuals Logo

Codan HF SSB series User Manual

Codan HF SSB series
163 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #18 background imageLoading...
Page #18 background image
Overview
HF SSB transceiver user guide 2-3
Channels
The total number of channels that can be stored depends on
the transceiver type and the amount of channel comments
used.
Channels cover:
the transmit frequency range specified at the front of this
guide
the receive frequency range 250kHz to 30MHz.
Channels can be single or two-frequency simplex. They can
be programmed at the factory or by an authorised Codan
dealer through the transceiver microphone socket using
Codan XP programming software and an IBM compatible
computer.
You can copy existing channel frequencies in the transceiver
to other channel locations. You can also create receive-only
channel frequencies.
Scanning
This feature allows you to monitor up to 10 selected channels
for incoming calls. Scanning can be programmed to stop on
receipt of a voice call or a selcall (if option selcall is fitted).
Free-tuning receiver
Your transceiver can be used as a free-tuning receiver
covering the receiver world broadcast bands over the
frequency range of 250kHz to 30MHz.
Overview
HF SSB transceiver user guide 2-3
Channels
The total number of channels that can be stored depends on
the transceiver type and the amount of channel comments
used.
Channels cover:
the transmit frequency range specified at the front of this
guide
the receive frequency range 250kHz to 30MHz.
Channels can be single or two-frequency simplex. They can
be programmed at the factory or by an authorised Codan
dealer through the transceiver microphone socket using
Codan XP programming software and an IBM compatible
computer.
You can copy existing channel frequencies in the transceiver
to other channel locations. You can also create receive-only
channel frequencies.
Scanning
This feature allows you to monitor up to 10 selected channels
for incoming calls. Scanning can be programmed to stop on
receipt of a voice call or a selcall (if option selcall is fitted).
Free-tuning receiver
Your transceiver can be used as a free-tuning receiver
covering the receiver world broadcast bands over the
frequency range of 250kHz to 30MHz.

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Codan HF SSB series and is the answer not in the manual?

Codan HF SSB series Specifications

General IconGeneral
BrandCodan
ModelHF SSB series
CategoryTransceiver
LanguageEnglish

Related product manuals