To Next Page

To Previous Page

Overview

HF SSB transceiver user guide 2-5

GPS (where fitted)

You can attach a GPS receiver to the transceiver. The

transceiver automatically transmits GPS information in

response to a request from another station. You can also send

your GPS location to another transceiver.

Telephone (where fitted)

A base station can be connected to an IPC-500 telephone

interconnect unit. This allows you to use your transceiver to

make telephone calls through the public telephone system.

Fax and data (where fitted)

By connecting ancillary equipment you can use your

transceiver for fax and data transmission and reception.

Cloning

For network users, you can copy frequencies and settings

from one transceiver to another by the simple process of

cloning. A special cable joins the two transceivers together at

their microphone sockets.

Installing your transceiver

To install your transceiver and connect the components that

make up your station, refer to the HF SSB transceiver

reference manual, Chapter 2, Installation.

