Codan HF SSB series - Page 3

HF SSB transceiver—9323
Part number 15-04073 Issue 1 iii
Options factory fitted in your transceiver
Code Description
C CICS—access to Computer Interface Command Set through transceiver’s
I
2
C adapter (accessory) or RS-232 port.
D Data—support for 9001/9002 fax/data modems.
I IPC-500—support for IPC-500.
LD Local Diagnostics—local diagnostics such as dB volts display and SWR.
RC Remote Control—support for control of transceiver by 8570/8571 remote
control system.
RDD RDD Telcall—telcall format for use with RDD bases (needs SEL or T).
RFDS RFDS—send RFDS emergency call (Australia only).
SEL Selcall: Full—send and receive selcall, group call, page call, selective
beacon call, status call and telcall.
TP Tx Power Select—selectable transmit power level.
TxD TxD—sets channel programming capability.
U Upper Sideband—upper sideband on transmit frequencies.
HF SSB transceiver—9323
Part number 15-04073 Issue 1 iii
Options factory fitted in your transceiver
Code Description
C CICS—access to Computer Interface Command Set through transceiver’s
I
2
C adapter (accessory) or RS-232 port.
D Data—support for 9001/9002 fax/data modems.
I IPC-500—support for IPC-500.
LD Local Diagnostics—local diagnostics such as dB volts display and SWR.
RC Remote Control—support for control of transceiver by 8570/8571 remote
control system.
RDD RDD Telcall—telcall format for use with RDD bases (needs SEL or T).
RFDS RFDS—send RFDS emergency call (Australia only).
SEL Selcall: Full—send and receive selcall, group call, page call, selective
beacon call, status call and telcall.
TP Tx Power Select—selectable transmit power level.
TxD TxD—sets channel programming capability.
U Upper Sideband—upper sideband on transmit frequencies.