Codan HF SSB series - Page 44

Using the transceiver
HF SSB transceiver user guide 3-13
To change the USB/LSB/AM setting:
Action Notes
1.
In Channel mode, make
sure that the transceiver
is not scanning.
See Scanning for incoming
calls on page 3-23.
2.
To switch between the
available
USB/LSB/AM settings
for the current channel,
press
USB/LSB
The left of the display indicates
the selected setting:
USB
,
LSB
or
AM
.

Using the transceiver
HF SSB transceiver user guide 3-13
To change the USB/LSB/AM setting:
Action Notes
1.
In Channel mode, make
sure that the transceiver
is not scanning.
See Scanning for incoming
calls on page 3-23.
2.
To switch between the
available
USB/LSB/AM settings
for the current channel,
press
USB/LSB
The left of the display indicates
the selected setting:
USB
,
LSB
or
AM
.
