Codan HF SSB series - Page 52

Using the transceiver
HF SSB transceiver user guide 3-21
Changing the operating mode
The transceiver starts in Channel mode when you switch it
on.
To change the operating mode:
Action Notes
1.
Repeatedly press
Mode
until you see the display
for the mode you want.
If you have used the transceiver
in a mode other than Channel
mode, the first press takes you
back to Channel mode.
Example of Channel mode
display:
158
4010
CALL
Rx.
USB
HI
Fleet channel
Pwr
Example of Clarifier mode
display:
USB
HI
CALL
158
4010
+--
CLARIFIER
Pwr
Example of Channel Options
mode display:
S2 Id: 185074 T–
Ch:158
U P
CHANNEL OPTIONS
Tx 4,010
Rx 4,010
Using the transceiver
HF SSB transceiver user guide 3-21
Changing the operating mode
The transceiver starts in Channel mode when you switch it
on.
To change the operating mode:
Action Notes
1.
Repeatedly press
Mode
until you see the display
for the mode you want.
If you have used the transceiver
in a mode other than Channel
mode, the first press takes you
back to Channel mode.
Example of Channel mode
display:
158
4010
CALL
Rx.
USB
HI
Fleet channel
Pwr
Example of Clarifier mode
display:
USB
HI
CALL
158
4010
+--
CLARIFIER
Pwr
Example of Channel Options
mode display:
S2 Id: 185074 T–
Ch:158
U P
CHANNEL OPTIONS
Tx 4,010
Rx 4,010