Codan HF SSB series - Page 72

Using the transceiver
HF SSB transceiver user guide 3-41
Handling telcalls
If your transceiver is fitted for sending telcalls, you should:
• set up a selcall group for use in telcalling (refer to the
HF SSB transceiver reference manual, Chapter 8, Selcall
address setup)
• assign the selcall group set up for telcalling to the
channels you are going to use for sending telcalls (refer
to the HF SSB transceiver reference manual, Chapter 3,
Channel creation and editing)
• set up the telephone directory with the telephone
numbers of the people you most commonly telcall (refer
to the HF SSB transceiver reference manual, Chapter 3,
Telephone directory creation).

Using the transceiver
HF SSB transceiver user guide 3-41
Handling telcalls
If your transceiver is fitted for sending telcalls, you should:
• set up a selcall group for use in telcalling (refer to the
HF SSB transceiver reference manual, Chapter 8, Selcall
address setup)
• assign the selcall group set up for telcalling to the
channels you are going to use for sending telcalls (refer
to the HF SSB transceiver reference manual, Chapter 3,
Channel creation and editing)
• set up the telephone directory with the telephone
numbers of the people you most commonly telcall (refer
to the HF SSB transceiver reference manual, Chapter 3,
Telephone directory creation).
