Codan HF SSB series - Page 94

Sending calls
HF SSB transceiver user guide 4-21
To send a page call:
Action Notes
1.
To find a good channel
to use, send selective
beacon calls on the
frequencies scanned by
the other station.
See Selective beacon call on
page 4-29.
2.
In Channel mode, select
the best channel and
wait until the channel is
clear of all voice and
data traffic.
3.
Press
F1
Example of the display:
208
5820
CALL
Rx.
USB
HI
Selcall:
TYPE
185074
The top right position of the
display shows the address of
the last station called.
4.
Repeatedly press
F2
until you see
Page call
displayed on the top
line.
Example of the display:
208
5820
CALL
Rx.
USB
HI
Page call:
TYPE
185074
Sending calls
HF SSB transceiver user guide 4-21
To send a page call:
Action Notes
1.
To find a good channel
to use, send selective
beacon calls on the
frequencies scanned by
the other station.
See Selective beacon call on
page 4-29.
2.
In Channel mode, select
the best channel and
wait until the channel is
clear of all voice and
data traffic.
3.
Press
F1
Example of the display:
208
5820
CALL
Rx.
USB
HI
Selcall:
TYPE
185074
The top right position of the
display shows the address of
the last station called.
4.
Repeatedly press
F2
until you see
Page call
displayed on the top
line.
Example of the display:
208
5820
CALL
Rx.
USB
HI
Page call:
TYPE
185074