Replacing a DataMan 300 series with a DataMan 262 on the
Factory Floor
An adapter kit (DM-ADAP-PLT) is available for DataMan 262 using which you can replace a DataMan 300, 302, 360 and
362 devices with a DataMan 262 device in the field. The kit includes the following:
Adapter plate
M3x8 hex socket head screws
The adapter plate has 8 holes: 4 threaded and 4 through holes.
You can attach the adapter plate to the DataMan 262 reader in two positions:
Position 1:
The mechanically correct position. The DataMan 262 device's front surface is inside as compared to the DataMan 300
series front surface.
Position 2:
The optically correct position. The Field of View is more or less same as that of DataMan 300 series, but the front surface
is sticking out compared to DataMan 362.
31
Setting Up Your DataMan 260
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
To Next Page
Loading...
