Communication Guide, ©ComAp – March 2014 48
IGS-NT Communication Guide 03-2014.pdf
Web server adjustment
Click to the "Webserver settings" icon in the toolbar to display the settings page.
Select the controller language the web pages will appear in.
Select the rate of automatic refresh of the scada page.
Internet connection via cellular network
Connection via Internet bridge IB-NT
What is InternetBridge-NT?
InternetBridge-NT is a communication module that allows connection of a single controller as well as
whole site to the Internet or Local area network. The connection to the Internet can be via built-in
cellular modem supporting 2G and 3G networks or Ethernet cable.
The module can be used for controllers from following product lines: IG-NT, IS-NT and IC-NT.
NOTE:
For proper operation it is necessary to update the controller firmware to a version which supports IB-
NT. For IG-NT and IS-NT standard branch the first version supporting IB-NT is 2.6.
For more information about IB-NT read IB-NT-2.0-Reference Guide.pdf.
To Next Page
Loading...
Need help?
General
