ComAp Inteli Mains NTC BaseBox

Communication Guide, ©ComAp – March 2014 53
IGS-NT Communication Guide 03-2014.pdf
Active E-mail (SMS E-mail)
Controllers
Controllers
IG-NT-BB
IG-NTC-BB
IS-NTC-BB
IM-NT-BB
IM-NTC-BB
Connection applicable
YES
YES
YES
YES
YES
Available ports
external
bridge IB-NT
ETHERNET
ETHERNET
external
bridge IB-NT
ETHERNET
Controllers
IG-NT
IG-NTC
IS-NT-BB
IM-NT
Connection applicable
YES
YES
YES
YES
Available ports
external bridge
IB-NT
ETHERNET
ETHERNET
external bridge
IB-NT
Equipment
Equipment needed
Controller side
Ethernet connection
Connection
Internet
PC side
Ethernet connection, e-mail message box
Function
When active e-mails are activated for alarms on site (warning, shut-down…) the controller sends
e-mail message to the predefined e-mail address. The function and settings for Direct Ethernet port
connection and connection via external bridge IG-IB are the same.
Controller setup
(Setpoints/Comms settings group)
Act. calls/SMS: AcallCH1(-3)-Type = IB-E-MAIL
Act. calls/SMS: AcallCH1(-3)-Addr = email address (maximum
length of email address is 31 characters)
Act. calls/Acall+SMS lang: AcallCH1(-3)-Addr = 1, 2, 3, ...
Hint:
Number of language corresponds with number of language in GenConfig (card “Languages”).