ComAp Inteli Mains NTC BaseBox User Manual

Communication Guide, ©ComAp – March 2014 5
IGS-NT Communication Guide 03-2014.pdf
Scope of the document
There are following types of communication between controller(s) and superior system in the
controller.
1. Local (on site) communication
 via ComAp software
 via MOUDBUS (MODBUS RTU or MODBUS TCP)
2. Remote communication
 via Ethernet
 via Internet (AirGate)
 via MODEM
These types of connections are available via RS232, RS485, USB, ETHERNET
communication ports.

ComAp Inteli Mains NTC BaseBox Specifications

General

Brand	ComAp
Model	Inteli Mains NTC BaseBox
Category	Controller
Language	English